banner

If you have just bought a Maytag fridge or freezer and you want to keep it functional always, then you need to be aware of all the common faults that can occur in this fridge or freezer. This will keep you informed and keep you prepared for emergencies and eventualities. In this write-up, you will get to learn about some of the common faults traceable to Maytag fridge and freezer.

Cracking, bubbling sound

This cannot be referred to as a fault really. So when you hear this noise in your fridge or freezer, do not get worked up over nothing. It is a normal sound being made by the fridge in the course of refrigerant gas circulation through the coil to effect cooling in the fridge and ice formation in the freezer.

Beeping sound or door alarm

This can occur when the fridge door is not properly closed. First thing to do when you hear such sound is to check if the door is properly closed. If the sound does not stop after closing the fridge’s door, then it must be due to something else. At this point, you should call on a qualified technician to check the fridge or freezer for you.

Periodic loud, cracking sound

This is due to the defrost heater getting heated up during the defrost cycle. The temperature change that occurs during the heating process will lead to expansion and contraction of the pipework, which causes the periodic crackling sound. It is nothing to worry about. However, make sure the fridge or freezer does not have problem getting cool or frozen again.

Noisy fan motor

This happens when ice build sup and reaches the fan area. The ice then leans on or touches the trim pat and causes the motor windings to start vibrating against the fan crawling. The best thing to do in this regard is to unplug the fridge or freezer and allow it to warm up and defrost. If the problem persists after you switch it on again, it may be time to call in a qualified technician.

Cooling problem

This problem will set up the System Fault Alarm built into the Maytag fridge and freezer. The alarm gets activated whenever the evaporator sensor is unable to detect decrease in temperature to 0oC from 4.5oC, which should be the case after the compressor has started up. When you notice this problem, you should call on a qualified technician.

Sensor fault alarm

The alarm comes up after the control built into the fridge and freezer detects NTC resistance value that is higher than 200 Kohmn and short circuit if it is lower than 400 ohms. The sensor is signaled by LED indicator light along with acoustic alarm.

Conclusion

If the fridge or freezer is still within warranty period, Maytag will be responsible for any repair affected on it. The reverse is the case if the warranty has expired. In that case, make sure you only call on a qualified, licensed and insured technician, who has many years of experience in repairing Maytag fridges and freezers.

Your refrigerator is undoubtedly one of the most hardworking appliances in the home. Truth is no home can live without it, considering its storage and other activities. The refrigerator is susceptible to faults and damages, just like virtually all other home appliances. However, such faults or damages can be repaired; no matter what forms they may take. You can link up with professionals to ensure things get done properly.

One of the common problems that can come up in a refrigerator has to do with the ice dispenser not working. Not to worry; this can be handled very easily and you will soon have the system working perfectly again. This problem can be caused by a host of factors.

With simple troubleshooting, you can easily identify what can be the cause and then affect the necessary repair. Some of the repairs are things you can handle easily at home, but there are times you may have to revert to trained technicians to help effect the desired repair.

The type of repair procedure you adopt can be determined by the brand of refrigerator you have. There are times however that the repair may involve complete removal and replacement of certain components or parts in the refrigerator.

Auger fault

Problem with the ice dispenser not working can be due to fault in the auger. It is very easy to know if the auger is working or not; if it is working properly, it usually make loud noise that can be heard very easily even when the freezer is closed. If you do not hear the sound anymore, it is most probably a sign that the auger is faulty and this will culminate into the ice dispenser not working.

Conclusion

Virtually all the tests associated with this problem require well-trained technicians to handle. It is therefore in your best interest to hand things over to them instead of tampering with electrical voltage, which may have unsavory effect on you at the end of the day.

There are many professionals around that can help repair your freezer when the ice dispenser is not working. However, make sure only professionals with proven expertise are employed for the task at hand. This way, your refrigerator can last for long.

Do you notice that your refrigerator starts leaking water for any reason unknown to you? Not to worry; it is actually a common problem. In this simple write-up, you are going to learn one or two things that can be done to if the problem and make your refrigerator functional again like ever before. Many of the leaks are very easy to repair.

Leak from lower front of your refrigerator

If the leak is occurring at the freezer door or the lower front of the refrigerator, it is most probably due to clogged drain tubes, which occurs when the refrigerator self-defrosts. All you have to do to fix the problem is to fix the clog.

Steps to follow

• First of all, unplug the refrigerator from power source

• Next, check properly to find out where the refrigerator is draining the defrosted water. In most cases, the defrosted water is usually directed into a pan located at the bottom of your refrigerator by a channel or tube. In the event you do not know where this is located, you can check the user’s manual.

• Lift off the cover panel. There are times you may also have to remove the floor panel too, depending on the brand of refrigerator.

• Next, remove the channel or bottom end drain from the refrigerator and then pass the tube inside a bucket to collect melted water.

• Afterwards, remove the upper part of the channel or tube. Use towel or bucket to collect any water that may flow out of the defroster.

• Thaw any frozen areas in the drain tube using a hair dryer. In order to feel for the stiff or frozen section in the tube, gently move it around or squeeze it.

• Next, you can place the upper part of the tube right under a faucet. To dislodge any clog found in the tube, you can run hot air through it. Make sure however that there is adequate space in the bucket to remove any excess liquid from the bottom of the tube once the obstruction is removed

• Finally, reattach the drain channel or tube once you finish with the outlined process.

Other remedies

Aside the above, the leak can equally occur from under the front part of the refrigerator. The leak in this situation can originate from the inlet line or the drip pan. What to do in such situation is to check the inlet line travelling to the bottom of the dispenser for any leak. Tighten the connection if the line is leaking.

Furthermore, check for any crack or hole in the line. Replace the line if there is any crack or hole. Check the drip pan also if there is incorrect placement. Cracks or holes can equally occur on the drip pain. Put any incorrect placement problem in order and purchase new drip pan if there are holes or cracks on the current one.

The drip pan replacement must however be done in accordance with manufacturers guidelines. If none of these efforts yield the desired result, it is high time you linked up with a qualified technician to help out. Do not forget that home remedies have their limits.

Call Me Back

Some people say we do awesome stuff...
enter your number and we will call you back very soon

Please enter your name.
Please enter your number.
Close